1.27mm SMD Biyu Fil Fil Layi (HP127SB-XXXX)

Pitch 1.27mm SMD Biyu Header/H: S1-2.50mm, S2-2.90mm, S3-1.70mm

1.27mm SMD mai jigon layi na layi biyu shine madaidaicin kuma abin dogaro na kayan lantarki wanda aka tsara don samar da amintaccen haɗin gwiwa da kwanciyar hankali a cikin kewayon aikace-aikace. Tare da ƙaƙƙarfan girmansa da ƙarfin aiki mai girma, wannan fil ɗin wani abu ne mai mahimmanci ga na'urorin lantarki da allon kewayawa.

Tuntube mu

samfurin bayani

Siffar

"1.27mm SMD mai jigon layi na layi biyu yana da nau'i biyu na fil tare da farar 1.27mm, yana sa ya dace da aikace-aikacen da ke buƙatar haɗin kai mai girma. An ƙera shi don a ɗora shi, yana ba da izinin shigarwa mai sauƙi da inganci akan PCBs. An yi fitilun da kayan inganci masu inganci, suna tabbatar da dorewa da aiki na dogon lokaci. Bugu da ƙari, ana samun maɓallin fil a cikin tsayin fil daban-daban da daidaitawa don ɗaukar buƙatun ƙira daban-daban.

Ƙayyadaddun bayanai

Matsayin Yanzu	1A AC/DC
Ƙimar Wutar Lantarki	30V AC / DC
Tuntuɓi Resistance	20mΩMax.
Yanayin Aiki	-40 ℃ ~ + 105 ℃
Juriya na Insulation	5000MΩ
Jurewa Voltage	500V AC / 60S
Matsakaicin Zazzabi Mai sarrafawa	260 ℃ na 10 seconds
Abubuwan Tuntuɓi	Copper Alloy, Plating Au/Sn ko wasu
Kayan Gida	Thermoplastic ko Babban Zazzabi Thermoplastic, UL 94V-0

Girman Zane

Pitch 1.27mm SMD Biyu Header/H: S1-2.50mm, S2-2.90mm, S3-1.70mm

Amfani

Ɗaya daga cikin mahimman fa'idodin 1.27mm SMD mai layin layi biyu shine babban abin dogaro da kwanciyar hankali. Tsarin layi biyu yana ba da amintaccen haɗi, yana rage haɗarin kutse ko katsewar sigina. Ƙirar dutsen saman kuma yana ba da izinin shigarwa mai sauƙi da ajiyar sararin samaniya, yana mai da shi manufa don aikace-aikace tare da iyakanceccen gidaje na PCB. Bugu da ƙari, an ƙera maɓallin fil ɗin don yin tsayayya da yanayin muhalli mai tsauri, yana mai da shi dacewa don amfani a masana'antu da aikace-aikacen mota.

Wani fa'idar 1.27mm SMD mai jigon layi biyu na layin shine iyawar sa. Ana iya amfani da shi a cikin nau'ikan na'urori da kayan aiki masu yawa, gami da kwamfutoci, na'urorin sadarwa, na'urorin lantarki masu amfani, da tsarin sarrafa masana'antu. Daidaitawar sa tare da daidaitattun shimfidar PCB da tsarin taro ya sa ya zama mafita mai dacewa da tsada don masana'antun lantarki.

Aikace-aikace

Ana amfani da 1.27mm SMD madaidaicin layi na layi biyu a cikin aikace-aikacen da ke buƙatar babban haɗin gwiwa kuma abin dogaro. Ya dace da amfani a cikin PCBs don sadarwar bayanai, rarraba wutar lantarki, da watsa sigina. Ƙananan girmansa da ƙaƙƙarfan gininsa sun sa ya zama kyakkyawan zaɓi don aikace-aikace inda sarari ya iyakance kuma karko yana da mahimmanci. Bugu da ƙari, maɓallin fil ɗin ya dace don amfani a aikace-aikacen da ke buƙatar yawan motsa jiki da kuma hawan keke mara nauyi, godiya ga amintaccen haɗin gwiwa da kwanciyar hankali.

A ƙarshe, 1.27mm SMD mai layi biyu na fil fil ɗin layi ne mai dacewa, abin dogaro, kuma babban kayan aikin lantarki wanda ke da mahimmanci ga na'urorin lantarki da kayan aiki na zamani. Karamin girmansa, babban abin dogaro, da dacewa tare da daidaitattun shimfidar PCB sun sa ya zama mafita mai mahimmanci ga masana'antun lantarki da masu zanen kaya. Ko ana amfani da shi a cikin kayan lantarki na mabukaci, kayan masana'antu, ko na'urorin sadarwa, wannan fil ɗin yana ba da kwanciyar hankali da aikin da ake buƙata don aikace-aikacen yau da kullun.